You can easily pack your PET bottles using single-cut Devmit shrink film rolls with any hot gun, as shown in the manual.
To manually pack PET bottles with LD shrink film, follow these steps:
1. Start by preparing the shrink film rolls. Ensure that they are single-cut Devmit shrink film rolls, suitable for PET bottles.
2. Place the PET bottles in an organized manner, ready for packing. Make sure they are clean and free from any dirt or debris.
3. Take the single-cut Devmit shrink film roll and unroll it to the desired length. Cut the film using a cutting tool or scissors.
4. Carefully wrap the cut shrink film around the PET bottles, ensuring that they are fully covered. Pay attention to the tightness of the wrap to ensure optimum packaging.
5. Once the bottles are wrapped, use a hot gun to apply heat to the shrink film. Move the hot gun in a back-and-forth motion to evenly distribute the heat and allow the film to shrink tightly around the bottles.
6. Continue applying heat until the shrink film has fully shrunk and tightly encased the PET bottles.
By following these steps, you can manually pack your PET bottles using LD shrink film. Remember to adjust the heat settings on the hot gun according to the thickness of the film and the desired shrinkage.
For a more automated solution, you can also consider using a plastic bottle packing machine. These machines are designed to streamline the packaging process and ensure consistent results. However, it is important to choose a reliable and trusted manufacturer for the best professional solution.
Check out leading manufacturers in the industry to find the most suitable coil packing solution for your needs. Bottle Packing Machine
"Efficient Method for Packaging PET Bottles with LD Shrink Film"
#Manually #Process #Shrink #Film #Pack #pet #bottles